Used to both support and fire stop the chimney system when it passes through the first combustible floor directly above the appliance.
The support component incorporates a patented intumescent matrix design which expands rapidly with temperature, and seals the plate to prevent the spread of fire or smoke from the room below.
WHATS IN THE BOX
1) Decorative Ventilated Fire Stop designed for mounting on the underside of the ceiling.
2. A load bearing 3mm thick glavanised Ventilated Fire Stop Plate which takes the weight of the flue and support.
3) A Flue Support Bracket.
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 230kgper cubic metre. The insulation is encapsulated within the twist-lock couplers. All parts are fully laser welded.
Distance to combustibles is 50mm.
V-TECH is HETAS Approved and is CE marked.
EN1856-1 T450 N1 D V2 L50040 G(50).
V-TECH Twin Wall Insulated Chimney parts are secured together by twisting two pieces together until they lock, then secure using the provided locking band.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).
|Item||V-TECH – Ventilated Ceiling Support (Solid Fuel) – 127 Ø|
|Designation:||EN1856-1 T450 N1 D V2 L50040 G(50)|
|Inner Material:||316L Stainless Steel – 0.40mm thick|
|Outer Material:||304 Stainless Steel – 0.40mm thick|
|Insulation:||25mm high-density (230kgper cubic metre) rockwool insulation|
|Fuels:||Wood, Oil, Gas, Low sulpher coal|
|Approvals:||HETAS / CE|
|Distance to Combustibles:||50mm|