The 90° Tee is usually installed when you are connecting the flue to the rear outlet of an appliance. It means that the flue can be cleaned via the bottom outlet of the 90° Tee. It also allow connection between horizontal and vertical runs.
This item comes with a 2 FREE Locking Bands.
APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 230kgper cubic metre. The insulation is encapsulated within the twist-lock couplers. All parts are fully laser welded.
Distance to combustibles is 50mm.
APPROVALS
V-TECH is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T450 N1 D V2 L50040 G(50).
INSTALLATION
V-TECH Twin Wall Insulated Chimney parts are secured together by twisting two pieces together until they lock, then secure using the provided locking band.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).
Item | V-TECH – 90° Tee – 152 Ø |
Designation: | EN1856-1 T450 N1 D V2 L50040 G(50) |
System: | V-TECH |
Inner Material: | 316L Stainless Steel – 0.40mm thick |
Outer Material: | 304 Stainless Steel – 0.40mm thick |
Insulation: | 25mm high-density (230kgper cubic metre) rockwool insulation |
Fuels: | Wood, Oil, Gas, Low sulpher coal |
Approvals: | HETAS / CE |
Distance to Combustibles: | 50mm |
Reviews
There are no reviews yet.