90° Bend allowing you a change in direction.
Bends are usually used to put an offset into the chimney, for example to go round a gutter.
Elbows are supplied with an unbarbed female coupler (to allow you to find the perfect angle for connection to the next part), and screw type locking band, for rigid joint bracing.
This item comes with a FREE Locking Band.
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 230kgper cubic metre. The insulation is encapsulated within the twist-lock couplers. All parts are fully laser welded.
Distance to combustibles is 50mm.
V-Tech is HETAS Approved and is CE marked.
EN1856-1 T450 N1 D V2 L50040 G(50).
V-Tech Twin Wall Insulated Chimney parts are secured together by twisting two pieces together until they lock, then secure using the provided locking band.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).
|Item||V-Tech – 90° Bend – 127 Ø|
|Designation:||EN1856-1 T450 N1 D V2 L50040 G(50)|
|Inner Material:||316L Stainless Steel – 0.40mm thick|
|Outer Material:||304 Stainless Steel – 0.40mm thick|
|Insulation:||25mm high-density (230kgper cubic metre) rockwool insulation|
|Fuels:||Wood, Oil, Gas, Low sulpher coal|
|Approvals:||HETAS / CE|
|Distance to Combustibles:||50mm|